public abstract class

DoubleBuffer

extends Buffer
implements Comparable<T>
java.lang.Object
   ↳ java.nio.Buffer
     ↳ java.nio.DoubleBuffer

Class Overview

A buffer of doubles.

A double buffer can be created in either one of the following ways:

  • Allocate a new double array and create a buffer based on it;
  • Wrap an existing double array to create a new buffer;
  • Use ByteBuffer.asDoubleBuffer to create a double buffer based on a byte buffer.

Summary

Public Methods
static DoubleBuffer allocate(int capacity)
Creates a double buffer based on a newly allocated double array.
final double[] array()
Returns the double array which this buffer is based on, if there is one.
final int arrayOffset()
Returns the offset of the double array which this buffer is based on, if there is one.
abstract DoubleBuffer asReadOnlyBuffer()
Returns a read-only buffer that shares its content with this buffer.
abstract DoubleBuffer compact()
Compacts this double buffer.
int compareTo(DoubleBuffer otherBuffer)
Compare the remaining doubles of this buffer to another double buffer's remaining doubles.
abstract DoubleBuffer duplicate()
Returns a duplicated buffer that shares its content with this buffer.
boolean equals(Object other)
Checks whether this double buffer is equal to another object.
abstract double get()
Returns the double at the current position and increases the position by 1.
abstract double get(int index)
Returns a double at the specified index; the position is not changed.
DoubleBuffer get(double[] dest, int off, int len)
Reads doubles from the current position into the specified double array, starting from the specified offset, and increases the position by the number of doubles read.
DoubleBuffer get(double[] dest)
Reads doubles from the current position into the specified double array and increases the position by the number of doubles read.
final boolean hasArray()
Indicates whether this buffer is based on a double array and is read/write.
int hashCode()
Calculates this buffer's hash code from the remaining chars.
abstract boolean isDirect()
Indicates whether this buffer is direct.
abstract ByteOrder order()
Returns the byte order used by this buffer when converting doubles from/to bytes.
final DoubleBuffer put(double[] src)
Writes doubles from the given double array to the current position and increases the position by the number of doubles written.
DoubleBuffer put(DoubleBuffer src)
Writes all the remaining doubles of the src double buffer to this buffer's current position, and increases both buffers' position by the number of doubles copied.
abstract DoubleBuffer put(int index, double d)
Write a double to the specified index of this buffer and the position is not changed.
abstract DoubleBuffer put(double d)
Writes the given double to the current position and increases the position by 1.
DoubleBuffer put(double[] src, int off, int len)
Writes doubles from the given double array, starting from the specified offset, to the current position and increases the position by the number of doubles written.
abstract DoubleBuffer slice()
Returns a sliced buffer that shares its content with this buffer.
String toString()
Returns a string representing the state of this double buffer.
static DoubleBuffer wrap(double[] array, int start, int len)
Creates a new double buffer by wrapping the given double array.
static DoubleBuffer wrap(double[] array)
Creates a new double buffer by wrapping the given double array.
[Expand]
Inherited Methods
From class java.nio.Buffer
From class java.lang.Object
From interface java.lang.Comparable

Public Methods

public static DoubleBuffer allocate (int capacity)

Creates a double buffer based on a newly allocated double array.

Parameters
capacity the capacity of the new buffer.
Returns
  • the created double buffer.
Throws
IllegalArgumentException if capacity is less than zero.

public final double[] array ()

Returns the double array which this buffer is based on, if there is one.

Returns
  • the double array which this buffer is based on.
Throws
ReadOnlyBufferException if this buffer is based on an array but it is read-only.
UnsupportedOperationException if this buffer is not based on an array.

public final int arrayOffset ()

Returns the offset of the double array which this buffer is based on, if there is one.

The offset is the index of the array corresponding to the zero position of the buffer.

Returns
  • the offset of the double array which this buffer is based on.
Throws
ReadOnlyBufferException if this buffer is based on an array, but it is read-only.
UnsupportedOperationException if this buffer is not based on an array.

public abstract DoubleBuffer asReadOnlyBuffer ()

Returns a read-only buffer that shares its content with this buffer.

The returned buffer is guaranteed to be a new instance, even if this buffer is read-only itself. The new buffer's position, limit, capacity and mark are the same as this buffer's.

The new buffer shares its content with this buffer, which means that this buffer's change of content will be visible to the new buffer. The two buffer's position, limit and mark are independent.

Returns
  • a read-only version of this buffer.

public abstract DoubleBuffer compact ()

Compacts this double buffer.

The remaining doubles will be moved to the head of the buffer, staring from position zero. Then the position is set to remaining(); the limit is set to capacity; the mark is cleared.

Returns
  • this buffer.
Throws
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public int compareTo (DoubleBuffer otherBuffer)

Compare the remaining doubles of this buffer to another double buffer's remaining doubles.

Parameters
otherBuffer another double buffer.
Returns
  • a negative value if this is less than other; 0 if this equals to other; a positive value if this is greater than other.
Throws
ClassCastException if other is not a double buffer.

public abstract DoubleBuffer duplicate ()

Returns a duplicated buffer that shares its content with this buffer.

The duplicated buffer's position, limit, capacity and mark are the same as this buffer's. The duplicated buffer's read-only property and byte order are the same as this buffer's, too.

The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the other. The two buffer's position, limit and mark are independent.

Returns
  • a duplicated buffer that shares its content with this buffer.

public boolean equals (Object other)

Checks whether this double buffer is equal to another object.

If other is not a double buffer then false is returned. Two double buffers are equal if and only if their remaining doubles are exactly the same. Position, limit, capacity and mark are not considered.

Parameters
other the object to compare with this double buffer.
Returns
  • true if this double buffer is equal to other, false otherwise.

public abstract double get ()

Returns the double at the current position and increases the position by 1.

Returns
  • the double at the current position.
Throws
BufferUnderflowException if the position is equal or greater than limit.

public abstract double get (int index)

Returns a double at the specified index; the position is not changed.

Parameters
index the index, must not be negative and less than limit.
Returns
  • a double at the specified index.
Throws
IndexOutOfBoundsException if index is invalid.

public DoubleBuffer get (double[] dest, int off, int len)

Reads doubles from the current position into the specified double array, starting from the specified offset, and increases the position by the number of doubles read.

Parameters
dest the target double array.
off the offset of the double array, must not be negative and not greater than dest.length.
len the number of doubles to read, must be no less than zero and not greater than dest.length - off.
Returns
  • this buffer.
Throws
IndexOutOfBoundsException if either off or len is invalid.
BufferUnderflowException if len is greater than remaining().

public DoubleBuffer get (double[] dest)

Reads doubles from the current position into the specified double array and increases the position by the number of doubles read.

Calling this method has the same effect as get(dest, 0, dest.length).

Parameters
dest the destination double array.
Returns
  • this buffer.
Throws
BufferUnderflowException if dest.length is greater than remaining().

public final boolean hasArray ()

Indicates whether this buffer is based on a double array and is read/write.

Returns
  • true if this buffer is based on a double array and provides read/write access, false otherwise.

public int hashCode ()

Calculates this buffer's hash code from the remaining chars. The position, limit, capacity and mark don't affect the hash code.

Returns
  • the hash code calculated from the remaining chars.

public abstract boolean isDirect ()

Indicates whether this buffer is direct. A direct buffer will try its best to take advantage of native memory APIs and it may not stay in the Java heap, so it is not affected by garbage collection.

A double buffer is direct if it is based on a byte buffer and the byte buffer is direct.

Returns
  • true if this buffer is direct, false otherwise.

public abstract ByteOrder order ()

Returns the byte order used by this buffer when converting doubles from/to bytes.

If this buffer is not based on a byte buffer, then this always returns the platform's native byte order.

Returns
  • the byte order used by this buffer when converting doubles from/to bytes.

public final DoubleBuffer put (double[] src)

Writes doubles from the given double array to the current position and increases the position by the number of doubles written.

Calling this method has the same effect as put(src, 0, src.length).

Parameters
src the source double array.
Returns
  • this buffer.
Throws
BufferOverflowException if remaining() is less than src.length.
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public DoubleBuffer put (DoubleBuffer src)

Writes all the remaining doubles of the src double buffer to this buffer's current position, and increases both buffers' position by the number of doubles copied.

Parameters
src the source double buffer.
Returns
  • this buffer.
Throws
BufferOverflowException if src.remaining() is greater than this buffer's remaining().
IllegalArgumentException if src is this buffer.
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public abstract DoubleBuffer put (int index, double d)

Write a double to the specified index of this buffer and the position is not changed.

Parameters
index the index, must not be negative and less than the limit.
d the double to write.
Returns
  • this buffer.
Throws
IndexOutOfBoundsException if index is invalid.
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public abstract DoubleBuffer put (double d)

Writes the given double to the current position and increases the position by 1.

Parameters
d the double to write.
Returns
  • this buffer.
Throws
BufferOverflowException if position is equal or greater than limit.
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public DoubleBuffer put (double[] src, int off, int len)

Writes doubles from the given double array, starting from the specified offset, to the current position and increases the position by the number of doubles written.

Parameters
src the source double array.
off the offset of double array, must not be negative and not greater than src.length.
len the number of doubles to write, must be no less than zero and not greater than src.length - off.
Returns
  • this buffer.
Throws
BufferOverflowException if remaining() is less than len.
IndexOutOfBoundsException if either off or len is invalid.
ReadOnlyBufferException if no changes may be made to the contents of this buffer.

public abstract DoubleBuffer slice ()

Returns a sliced buffer that shares its content with this buffer.

The sliced buffer's capacity will be this buffer's remaining(), and its zero position will correspond to this buffer's current position. The new buffer's position will be 0, limit will be its capacity, and its mark is cleared. The new buffer's read-only property and byte order are the same as this buffer's.

The new buffer shares its content with this buffer, which means either buffer's change of content will be visible to the other. The two buffer's position, limit and mark are independent.

Returns
  • a sliced buffer that shares its content with this buffer.

public String toString ()

Returns a string representing the state of this double buffer.

Returns
  • A string representing the state of this double buffer.

public static DoubleBuffer wrap (double[] array, int start, int len)

Creates a new double buffer by wrapping the given double array.

The new buffer's position will be start, limit will be start + len, capacity will be the length of the array.

Parameters
array the double array which the new buffer will be based on.
start the start index, must not be negative and not greater than array.length.
len the length, must not be negative and not greater than array.length - start.
Returns
  • the created double buffer.
Throws
IndexOutOfBoundsException if either start or len is invalid.

public static DoubleBuffer wrap (double[] array)

Creates a new double buffer by wrapping the given double array.

Calling this method has the same effect as wrap(array, 0, array.length).

Parameters
array the double array which the new buffer will be based on.
Returns
  • the created double buffer.