public class

Gravity

extends Object
java.lang.Object
   ↳ android.view.Gravity

Class Overview

Standard constants and tools for placing an object within a potentially larger container.

Summary

Constants
int AXIS_CLIP Raw bit controlling whether the right/bottom edge is clipped to its container, based on the gravity direction being applied.
int AXIS_PULL_AFTER Raw bit controlling how the right/bottom edge is placed.
int AXIS_PULL_BEFORE Raw bit controlling how the left/top edge is placed.
int AXIS_SPECIFIED Raw bit indicating the gravity for an axis has been specified.
int AXIS_X_SHIFT Bits defining the horizontal axis.
int AXIS_Y_SHIFT Bits defining the vertical axis.
int BOTTOM Push object to the bottom of its container, not changing its size.
int CENTER Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.
int CENTER_HORIZONTAL Place object in the horizontal center of its container, not changing its size.
int CENTER_VERTICAL Place object in the vertical center of its container, not changing its size.
int CLIP_HORIZONTAL Flag to clip the edges of the object to its container along the horizontal axis.
int CLIP_VERTICAL Flag to clip the edges of the object to its container along the vertical axis.
int DISPLAY_CLIP_HORIZONTAL Special constant to enable clipping to an overall display along the horizontal dimension.
int DISPLAY_CLIP_VERTICAL Special constant to enable clipping to an overall display along the vertical dimension.
int FILL Grow the horizontal and vertical size of the object if needed so it completely fills its container.
int FILL_HORIZONTAL Grow the horizontal size of the object if needed so it completely fills its container.
int FILL_VERTICAL Grow the vertical size of the object if needed so it completely fills its container.
int HORIZONTAL_GRAVITY_MASK Binary mask to get the horizontal gravity of a gravity.
int LEFT Push object to the left of its container, not changing its size.
int NO_GRAVITY Constant indicating that no gravity has been set
int RIGHT Push object to the right of its container, not changing its size.
int TOP Push object to the top of its container, not changing its size.
int VERTICAL_GRAVITY_MASK Binary mask to get the vertical gravity of a gravity.
Public Constructors
Gravity()
Public Methods
static void apply(int gravity, int w, int h, Rect container, Rect outRect)
Apply a gravity constant to an object.
static void apply(int gravity, int w, int h, Rect container, int xAdj, int yAdj, Rect outRect)
Apply a gravity constant to an object.
static void applyDisplay(int gravity, Rect display, Rect inoutObj)
Apply additional gravity behavior based on the overall "display" that an object exists in.
static boolean isHorizontal(int gravity)

Indicate whether the supplied gravity has an horizontal pull.

static boolean isVertical(int gravity)

Indicate whether the supplied gravity has a vertical pull.

[Expand]
Inherited Methods
From class java.lang.Object

Constants

public static final int AXIS_CLIP

Raw bit controlling whether the right/bottom edge is clipped to its container, based on the gravity direction being applied.

Constant Value: 8 (0x00000008)

public static final int AXIS_PULL_AFTER

Raw bit controlling how the right/bottom edge is placed.

Constant Value: 4 (0x00000004)

public static final int AXIS_PULL_BEFORE

Raw bit controlling how the left/top edge is placed.

Constant Value: 2 (0x00000002)

public static final int AXIS_SPECIFIED

Raw bit indicating the gravity for an axis has been specified.

Constant Value: 1 (0x00000001)

public static final int AXIS_X_SHIFT

Bits defining the horizontal axis.

Constant Value: 0 (0x00000000)

public static final int AXIS_Y_SHIFT

Bits defining the vertical axis.

Constant Value: 4 (0x00000004)

public static final int BOTTOM

Push object to the bottom of its container, not changing its size.

Constant Value: 80 (0x00000050)

public static final int CENTER

Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.

Constant Value: 17 (0x00000011)

public static final int CENTER_HORIZONTAL

Place object in the horizontal center of its container, not changing its size.

Constant Value: 1 (0x00000001)

public static final int CENTER_VERTICAL

Place object in the vertical center of its container, not changing its size.

Constant Value: 16 (0x00000010)

public static final int CLIP_HORIZONTAL

Flag to clip the edges of the object to its container along the horizontal axis.

Constant Value: 8 (0x00000008)

public static final int CLIP_VERTICAL

Flag to clip the edges of the object to its container along the vertical axis.

Constant Value: 128 (0x00000080)

public static final int DISPLAY_CLIP_HORIZONTAL

Special constant to enable clipping to an overall display along the horizontal dimension. This is not applied by default by apply(int, int, int, Rect, int, int, Rect); you must do so yourself by calling applyDisplay(int, Rect, Rect).

Constant Value: 16777216 (0x01000000)

public static final int DISPLAY_CLIP_VERTICAL

Special constant to enable clipping to an overall display along the vertical dimension. This is not applied by default by apply(int, int, int, Rect, int, int, Rect); you must do so yourself by calling applyDisplay(int, Rect, Rect).

Constant Value: 268435456 (0x10000000)

public static final int FILL

Grow the horizontal and vertical size of the object if needed so it completely fills its container.

Constant Value: 119 (0x00000077)

public static final int FILL_HORIZONTAL

Grow the horizontal size of the object if needed so it completely fills its container.

Constant Value: 7 (0x00000007)

public static final int FILL_VERTICAL

Grow the vertical size of the object if needed so it completely fills its container.

Constant Value: 112 (0x00000070)

public static final int HORIZONTAL_GRAVITY_MASK

Binary mask to get the horizontal gravity of a gravity.

Constant Value: 7 (0x00000007)

public static final int LEFT

Push object to the left of its container, not changing its size.

Constant Value: 3 (0x00000003)

public static final int NO_GRAVITY

Constant indicating that no gravity has been set

Constant Value: 0 (0x00000000)

public static final int RIGHT

Push object to the right of its container, not changing its size.

Constant Value: 5 (0x00000005)

public static final int TOP

Push object to the top of its container, not changing its size.

Constant Value: 48 (0x00000030)

public static final int VERTICAL_GRAVITY_MASK

Binary mask to get the vertical gravity of a gravity.

Constant Value: 112 (0x00000070)

Public Constructors

public Gravity ()

Public Methods

public static void apply (int gravity, int w, int h, Rect container, Rect outRect)

Apply a gravity constant to an object.

Parameters
gravity The desired placement of the object, as defined by the constants in this class.
w The horizontal size of the object.
h The vertical size of the object.
container The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
outRect Receives the computed frame of the object in its container.

public static void apply (int gravity, int w, int h, Rect container, int xAdj, int yAdj, Rect outRect)

Apply a gravity constant to an object.

Parameters
gravity The desired placement of the object, as defined by the constants in this class.
w The horizontal size of the object.
h The vertical size of the object.
container The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
xAdj Offset to apply to the X axis. If gravity is LEFT this pushes it to the right; if gravity is RIGHT it pushes it to the left; if gravity is CENTER_HORIZONTAL it pushes it to the right or left; otherwise it is ignored.
yAdj Offset to apply to the Y axis. If gravity is TOP this pushes it down; if gravity is BOTTOM it pushes it up; if gravity is CENTER_VERTICAL it pushes it down or up; otherwise it is ignored.
outRect Receives the computed frame of the object in its container.

public static void applyDisplay (int gravity, Rect display, Rect inoutObj)

Apply additional gravity behavior based on the overall "display" that an object exists in. This can be used after apply(int, int, int, Rect, int, int, Rect) to place the object within a visible display. By default this moves or clips the object to be visible in the display; the gravity flags DISPLAY_CLIP_HORIZONTAL and DISPLAY_CLIP_VERTICAL can be used to change this behavior.

Parameters
gravity Gravity constants to modify the placement within the display.
display The rectangle of the display in which the object is being placed.
inoutObj Supplies the current object position; returns with it modified if needed to fit in the display.

public static boolean isHorizontal (int gravity)

Indicate whether the supplied gravity has an horizontal pull.

Parameters
gravity the gravity to check for horizontal pull
Returns
  • true if the supplied gravity has an horizontal pull

public static boolean isVertical (int gravity)

Indicate whether the supplied gravity has a vertical pull.

Parameters
gravity the gravity to check for vertical pull
Returns
  • true if the supplied gravity has a vertical pull