apache2.4.12 + tomcat 7.0.57 +JK @centos6.5 云服务器二级域名配置

大连馋师 发布于 2015/02/13 10:00
阅读 1K+
收藏 0

出现的问题是www.mydomain.com 和 two.mydomain.com 都是一样的。我们期望的是一级域名www.mydomain.com是一个静态页,如/usr/local/apache2/htdocs;二级域名two.domain.com 是目前开发的工程index页。配置参数如下。各位oscer,求教!多谢! 回帖的看贴的BAT都发红包,osc提供妹子噢~~


1. httpd.conf @apache

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
# will be interpreted as '/logs/access_log'.


#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/usr/local/apache2"


#
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
#
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
#
# Mutex default:logs


#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80


#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
#LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule info_module modules/mod_info.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule jk_module modules/mod_jk.so
Include /usr/local/apache2/conf/mod_jk.conf


<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon


</IfModule>


# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#


#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin 127.0.0.1


#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName localhost:80
#ServerName www.mydomain.com


#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
#<Directory />
# Options Indexes FollowSymLinks
#Options None
#    AllowOverride none
   # Require all denied
#</Directory>


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#


#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
#DocumentRoot "/usr/local/tomcat/webapps/mgrweb"


#<Directory "/usr/local/tomcat/webapps/mgrweb">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
 #   Options Indexes FollowSymLinks
#Options None


    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
#    AllowOverride None


    #
    # Controls who can get stuff from this server.
    #
#    Require all granted
#</Directory>


#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html index.htm
</IfModule>


#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"


#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn


<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common


    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>


    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access_log" common


    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access_log" combined
</IfModule>


<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar


    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.


    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"


</IfModule>


<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>


#
# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
#<Directory "/usr/local/apache2/cgi-bin">
#Options Indexes FollowSymLinks
#Options None
    #AllowOverride None
    #Options None
    #Require all granted
#</Directory>


<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types


    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz


    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi


    # For type maps (negotiated resources):
    #AddHandler type-map var


    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>


#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic


#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#


#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited


#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on


# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.


# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf


# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf


# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf


# Language settings
#Include conf/extra/httpd-languages.conf


# User home directories
#Include conf/extra/httpd-userdir.conf


# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf


# Virtual hosts
#Include conf/extra/httpd-vhosts.conf


# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf


# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf


# Various default settings
#Include conf/extra/httpd-default.conf


# Configure mod_proxy_html to understand HTML4/XHTML1
#<IfModule proxy_html_module>
#Include conf/extra/proxy-html.conf
#</IfModule>


# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>








<VirtualHost two.mydomain.com:80>
ServerName two.mydomain.com
DirectoryIndex index.htm
DocumentRoot "/usr/local/"
#ProxyPreserveHost on
#ProxyRequests Off
#proxyVia full
#<Proxy *>
# Order deny,allow
# Allow from all
#</Proxy>
#ProxyPass / http://two.mydomain.com:8080/mgrweb/
        #ProxyPassReverse / http://two.mydomain.com:8080/mgrweb/
    ServerAlias two.mydomain.com
    #JkMount /*.jsp worker1
    #JkMount /*.htm worker1
    #JkMount /* worker1
   # JkUnMount /*.html worker1   
</VirtualHost>


#<VirtualHost www.mydomain.com:80>
# ServerName www.mydomain.com
# DocumentRoot "/usr/local/apache2/htdocs"
# DirectoryIndex index.html
#    JkMount /*.jsp worker1
#    JkMount /*.htm worker1
#    JkMount /* worker1 
#    JkUnMount /*.html worker1
#</VirtualHost>








2. server.xml@tomcat

<?xml version='1.0' encoding='utf-8'?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at


      http://www.apache.org/licenses/LICENSE-2.0


  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!-- Note:  A "Server" is not itself a "Container", so you may not
     define subcomponents such as "Valves" at this level.
     Documentation at /docs/config/server.html
 -->
<Server port="8005" shutdown="SHUTDOWN">
  <Listener className="org.apache.catalina.startup.VersionLoggerListener" />
  <!-- Security listener. Documentation at /docs/config/listeners.html
  <Listener className="org.apache.catalina.security.SecurityListener" />
  -->
  <!--APR library loader. Documentation at /docs/apr.html -->
  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />
  <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html -->
  <Listener className="org.apache.catalina.core.JasperListener" />
  <!-- Prevent memory leaks due to use of particular java/javax APIs-->
  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />
  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
  <Listener className="org.apache.catalina.core.ThreadLocalLeakPreventionListener" />


  <!-- Global JNDI resources
       Documentation at /docs/jndi-resources-howto.html
  -->
  <GlobalNamingResources>
    <!-- Editable user database that can also be used by
         UserDatabaseRealm to authenticate users
    -->
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
  </GlobalNamingResources>


  <!-- A "Service" is a collection of one or more "Connectors" that share
       a single "Container" Note:  A "Service" is not itself a "Container",
       so you may not define subcomponents such as "Valves" at this level.
       Documentation at /docs/config/service.html
   -->
  <Service name="Catalina">


    <!--The connectors can use a shared executor, you can define one or more named thread pools-->
    <!--
    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
        maxThreads="150" minSpareThreads="4"/>
    -->




    <!-- A "Connector" represents an endpoint by which requests are received
         and responses are returned. Documentation at :
         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
         Java AJP  Connector: /docs/config/ajp.html
         APR (HTTP/AJP) Connector: /docs/apr.html
         Define a non-SSL HTTP/1.1 Connector on port 8080
    -->
    <Connector port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    <!-- A "Connector" using the shared thread pool-->
    <!--
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443
         This connector uses the BIO implementation that requires the JSSE
         style configuration. When using the APR/native implementation, the
         OpenSSL style configuration is required as described in the APR/native
         documentation -->
    <!--
    <Connector port="8443" protocol="org.apache.coyote.http11.Http11Protocol"
               maxThreads="150" SSLEnabled="true" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
    -->


    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />




    <!-- An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host).
         Documentation at /docs/config/engine.html -->


    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <Engine name="Catalina" defaultHost="two.mydomain.com">


      <!--For clustering, please take a look at documentation at:
          /docs/cluster-howto.html  (simple how to)
          /docs/config/cluster.html (reference documentation) -->
      <!--
      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
      -->


      <!-- Use the LockOutRealm to prevent attempts to guess user passwords
           via a brute-force attack -->
      <Realm className="org.apache.catalina.realm.LockOutRealm">
        <!-- This Realm uses the UserDatabase configured in the global JNDI
             resources under the key "UserDatabase".  Any edits
             that are performed against this UserDatabase are immediately
             available for use by the Realm.  -->
        <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
               resourceName="UserDatabase"/>
      </Realm>




      <Host name="two.mydomain.com"  appBase="webapps"
            unpackWARs="true" autoDeploy="true">



        <!-- SingleSignOn valve, share authentication between web applications
             Documentation at: /docs/config/valve.html -->
        <!--
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        -->


        <!-- Access log processes all example.
             Documentation at: /docs/config/valve.html
             Note: The pattern used is equivalent to using pattern="common" -->
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
               prefix="localhost_access_log." suffix=".txt"
               pattern="%h %l %u %t &quot;%r&quot; %s %b" />
<!--   -->
<!--<Context path="/" reloadable="true" docBase="/usr/local/tomcat/webapps/portalweb" workDir="/usr/local/tomcat/webapps/portalweb/work" />-->
<Context path="/" reloadable="true" docBase="/usr/local/tomcat/webapps/mgrweb" workDir="/usr/local/tomcat/webapps/mgrweb/work" />

      </Host>
    </Engine>
  </Service>
</Server>



3. mod_jk.conf @ apache

JkWorkersFile /usr/local/apache2/conf/workers.properties
# Where to put jk logs
JkLogFile /usr/local/apache2/logs/mod_jk.log
# Set the jk log level [debug/error/info]
JkLogLevel info
# Select the log format
JkLogStampFormat "[%a %b %d %H:%M:%S %Y]"
# JkOptions indicate to send SSL KEY SIZE, 
JkOptions  +ForwardKeySize +ForwardURICompat -ForwardDirectories
# JkRequestLogFormat set the request format 
JkRequestLogFormat "%w %V %T"
# 将所有servlet 和jsp请求通过ajp13的协议送给Tomcat,让Tomcat来处理 
JkMount /servlet/*  worker1
JkMount /*.jsp worker1
JkMount /*.* worker1
JkMount /*/*.* worker1
JkMount /* worker1



4. workers.properties  @apache

#workers.tomcat_home=/usr/local/tomcat
#workers.java_home=/usr/java/jdk1.6.0_38


# Defining a worker named worker1 and of type ajp13
worker.list=worker1
# Set properties for worker1
worker.worker1.type=ajp13  
#worker.worker1.host=localhost  
#dongchangkun 20150212 1101
worker.worker1.host=localhost
worker.worker1.port=8009
worker.worker1.lbfactor=50  
worker.worker1.cachesize=10  
worker.worker1.cache_timeout=600  
worker.worker1.socket_keepalive=1  
worker.worker1.socket_timeout=300

加载中
0
Feng_Yu
Feng_Yu

可以这么办,二级域名用反向代理,tomcat不用任何配置,只需要把WAR包命名成ROOT.war

PS: mod_jk这玩意配置实在繁琐,感觉最大的意义在负载均衡,只有一个单实例tomcat没必要上mod_jk,还是用apache自家的方案mod_proxy吧。使用proxy_ajp协议反向代理,记得在tomcat官方文档也是推荐的一种做法。

<VirtualHost *:80>
    ServerName www.mydomain.com
    DocumentRoot /usr/local/apache2/htdocs
</VirtualHost>

<VirtualHost *:80>
# 这行前面的井号先去掉 LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    ServerName tow.mydomain.com
    ProxyPass / ajp://127.0.0.1:8009/
</VirtualHost>



0
红薯
红薯
tomcat没配置二级域名吗,能正常工作了吗
0
大连馋师
大连馋师
  <Engine name="Catalina" defaultHost="two.mydomain.com">
  
   <Host name="two.mydomain.com"  appBase="webapps"
            unpackWARs="true" autoDeploy="true">
以上是tomcat配置, 我们不想启动多个tomcat实例,能解决吗?
红薯
红薯
这里只配置一个,tomcat必须有多个host
0
英强
英强

在apache中你给www.mydomain.com作配置了吗?没发现哦

0
大连馋师
大连馋师

一开始走了弯路,没想动tomcat,只想通过apache链接tomcat。后来按照红薯微信招法实践通过。

再次印证了tomcat的强大,可以多端口、多host、多service。

楼上的朋友说通过proxy_ajp,以后有机会一定尝试!!

祝各位情人节愉快!!

Feng_Yu
Feng_Yu
proxy_ajp和proxy_http相比,配置比proxy_http更简单(因为不需要ProxyPassReverse,具体看考apache官方文档的proxy_ajp模块),最主要的是proxy_ajp是二进制格式,数据压缩占优势,会比proxy_http更快,据说有人测试过,同样使用apache反向代理tomcat,proxy_ajp会比proxy_http性能高10%左右
0
大连馋师
大连馋师
啊? 不能设置多个最佳答案啊???
0
大连馋师
大连馋师

贴出来完整情况:

=============================

环境:
1.apache 2.4.12
2.tomcat 7.0.57
3.centos 5.6


需求:
1. 一级域名www.domain.com和二级域名two.domain.com在同一个服务器上
2. 访问www.domain.com是一个静态页,访问two.domain.com是开发工程;都是80端口
3. tomcat只能启动一个实例


方案:
1. apache + JK --> tomcat


配置文件如下(产品做技术,有点流氓会武术的感觉,有点手生了,很多配置写的不好,见谅):
1. httpd.conf @ apache
----------------------------------------------------------------------------------------------------
ServerRoot "/usr/local/apache2"


#Listen 12.34.56.78:80
Listen 80


#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule jk_module modules/mod_jk.so
Include /usr/local/apache2/conf/mod_jk.conf


ServerName localhost:80


#DocumentRoot "/usr/local/tomcat/webapps/mgrweb"


<VirtualHost two.mydomain.com:80>
ServerName two.mydomain.com
DirectoryIndex index.htm
DocumentRoot "/usr/local/"
#ProxyPreserveHost on
#ProxyRequests Off
#proxyVia full
#<Proxy *>
# Order deny,allow
# Allow from all
#</Proxy>
#ProxyPass / http://two.mydomain.com:8080/mgrweb/
        #ProxyPassReverse / http://two.mydomain.com:8080/mgrweb/
    ServerAlias two.mydomain.com
    #JkMount /*.jsp worker1
    #JkMount /*.htm worker1
    #JkMount /* worker1
   # JkUnMount /*.html worker1   
</VirtualHost>


#<VirtualHost www.mydomain.com:80>
# ServerName www.mydomain.com
# DocumentRoot "/usr/local/apache2/htdocs"
# DirectoryIndex index.html
#    JkMount /*.jsp worker1
#    JkMount /*.htm worker1
#    JkMount /* worker1 
#    JkUnMount /*.html worker1
#</VirtualHost>




2. server.xml @ tomcat
----------------------------------------------------------------------------------------------------
 <Service name="Catalina">
    <Connector port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />


    <Engine name="Catalina" defaultHost="localhost">
      <Realm className="org.apache.catalina.realm.LockOutRealm">
        <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
               resourceName="UserDatabase"/>
      </Realm>


      <Host name="two.mydomain.com"  appBase="webapps"
            unpackWARs="true" autoDeploy="true">
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
               prefix="localhost_access_log." suffix=".txt"
               pattern="%h %l %u %t &quot;%r&quot; %s %b" />
<Context path="/" reloadable="true" docBase="/usr/local/tomcat/webapps/mgrweb" workDir="/usr/local/tomcat/webapps/mgrweb/work" />
      </Host>
 
      <Host name="www.mydomain.com"  appBase="webapps"
            unpackWARs="true" autoDeploy="true">
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs"
               prefix="localhost_access_log." suffix=".txt"
               pattern="%h %l %u %t &quot;%r&quot; %s %b" />
<Context path="/" reloadable="true" docBase="/usr/local/apache2/htdocs"  />
      </Host>  
 
    </Engine>
  </Service>
</Server>




3. mod_jk.conf @ apache
----------------------------------------------------------------------------------------------------
JkWorkersFile /usr/local/apache2/conf/workers.properties
# Where to put jk logs
JkLogFile /usr/local/apache2/logs/mod_jk.log
# Set the jk log level [debug/error/info]
JkLogLevel info
# Select the log format
JkLogStampFormat "[%a %b %d %H:%M:%S %Y]"
# JkOptions indicate to send SSL KEY SIZE, 
JkOptions  +ForwardKeySize +ForwardURICompat -ForwardDirectories
# JkRequestLogFormat set the request format 
JkRequestLogFormat "%w %V %T"
# 将所有servlet 和jsp请求通过ajp13的协议送给Tomcat,让Tomcat来处理 
JkMount /servlet/*  worker1
JkMount /*.jsp worker1
JkMount /*.* worker1
JkMount /*/*.* worker1
JkMount /* worker1




4. workers.properties @ apache
----------------------------------------------------------------------------------------------------
#workers.tomcat_home=/usr/local/tomcat
#workers.java_home=/usr/java/jdk1.6.0_38


# Defining a worker named worker1 and of type ajp13
worker.list=worker1
# Set properties for worker1
worker.worker1.type=ajp13  
#worker.worker1.host=localhost  
#dongchangkun 20150212 1101
worker.worker1.host=localhost
worker.worker1.port=8009
worker.worker1.lbfactor=50  
worker.worker1.cachesize=10  
worker.worker1.cache_timeout=600  
worker.worker1.socket_keepalive=1  
worker.worker1.socket_timeout=300


Feng_Yu
Feng_Yu
基于域名的虚拟主机这么配置是不对的。建议好好读一读apache的官方文档,看看apache官方是怎么描述的
返回顶部
顶部